Real Cedar Siding
Real Cedar Decking
Real Cedar Outdoor
Western Red Cedar Indoor
Western Red Cedar Timbers
Lap sidings are normally supplied in a variety of patterns either green (unseasoned) or dry in clear or knotty grades and with a smooth or saw textured face.
Channel siding is a popular type of lap siding and is used whenever a rustic appearance is desired. A versatile siding, it can be installed vertically, horizontally or diagonally. In channel siding the profile of each board partially overlaps that of the board next to it creating a channel that gives shadow line effects, provides excellent weather protection and allows for dimensional movement.
Channel siding is normally supplied in unseasoned knotty grades. The face side is saw textured. Commonly available sizes are 1″x6″, 1″x8″, and 1″x10″. Clear grades are manufactured to order.
The highest grade. Includes only pieces with heartwood on the exposed face. Many pieces completely clear, others have minor imperfections that do not detract from their fine appearance.
Permits somewhat more imperfections than Clear Heart but the grade is still restricted to pieces with excellent appearance. Common specifications are A and Better and A and Better with a percentage of B clear allowed (NLGA 200c/WCLIB 102-d/WWPA 20.13).
Available kiln dried or unseasoned. Knots are sound and tight.
* Common specification is select Knotty with a percentage of quality knotty allowed.
Designed to meet appearance requirements for cedar sidings and trim. Ask your WRCLA distributor for details. Manufacturers may market their own proprietary grades.
Suitable for exterior construction. Occasional pieces may require trimming to yield suitable quality for the intended end use.
NLGA 114a, b, c
WCLIB 118-a, b, c
NLGA – National Lumber Grades Authority
WCLIB – West Coast Lumber Inspection Bureau
|Nominal Width (in.)||Dressed Width (in.)||Exposed Face Width (in.)||Linear Feet Factor||Board Feet Factor|
The following information is required when specifying lap siding products:
|Specification Information Required||Sample Specification|
Western Red Cedar
|WRCLA Western Red Cedar|
|Product Pattern and Intended Use:|
Siding is used as an exterior cladding to provide both weather protection and architectural style. The designer may choose from a variety of lap siding patterns specified by name or pattern number.
|Lap Siding Pattern WP11|
Specify the nominal size of the product.
|1 x 6″|
The grade of the product governs its overall quality. Refer to WRCLA specification literature or grading agency rule books for available grades.
|Grading Agency Paragraph:|
To ensure that the product meets a written standard, an agency grade paragraph should be referenced.
|NLGA para. 204a|
Specify whether the product is to be green (unseasoned) or kiln-dried.
|Surface to be exposed:|
Specify the application orientation to assist the supplier in shipping the right product for the job.
Express in linear feet the quantity required.
|2,000 linear feet|
Please note that the measurements displayed on this webpage are displayed in Imperial units. If metric is required, please perform the proper conversion as necessary.
Please note that the standards, grades and other information mentioned on this webpage are based on North American data. Please refer to your local resources or authorities for country-specific data relating to a particular country if required.